By: 1 January 2007

Orthodynamics is well known in the orthopaedic community, with an enviable reputation of being able to manufacture and provide the orthopaedic surgeon with a custom-made prosthesis usually within 5 working days. In addition to this service Orthodynamics has a product range of revision hip and knee prostheses and a primary hip prosthesis, which they design and manufacture in the UK.

The product range consists of:

  • Cannulok a revision hip prosthesis that is available either with or without HA coating. All these stems are anatomically sided, cannulated and distally locked.
  • Mayday Arthrodesis Nail a two-part nail for arthrodesis of the knee, customised to suit each patients anatomy.
  • Acetabular Re-Inforcement Mesh available in 4 sizes and is sufficiently pliable allowing optimal seating and structural under pinning of cemented / grafted acetabular.
  • MCHA Cementless HA Coated Modular Hemi-Arthroplasty with a broad proximal section to ensure primary fixation, which is enhanced by a plasma coating of hydroxyapatite to the depth of approximately 90-microns.
  • Logic Contemporary Primary or Hemi-Arthroplasty Option Hip System is based upon the cement optimisation principles, demonstrated originally by Ling et al. from Exeter. This stem is available as a Mono block or Modular system.
  • NOVAE Acetabular Cups and Instrumentation from SERF, in France. A Dual Mobility system, with various external configurations to suit primary, revision or reconstructive surgery, cemented and non-cemented.

Orthodynamics also distribute Spacers from Tecres, which are temporary partial weight bearing implantable devices facilitating the treatment of infected total hip or knee replacements using the two-stage method. Orthodynamics will be exhibiting at Arab Health 2007 on January 29th – February 1st on stand PD30.